Ready Mix Concrete Admixture

Home » Products » Ready Mix Concrete Admixture

Ready Mix Concrete Admixture

Chemical Admixtures for Concrete
Chemical Admixtures for Concrete is one of the main product lines. From the first generation Lignosulfonate, the second generation Naphthalene based, to the third generation Polycarboxylic type, they are all available. To meet the needs of different project requirements, working and environments conditions, we also produce admixtures for the purposes of hardening accelerating and water reducing, flash setting, set retarding, expanding, shrinkage reducing, pumping, foaming/anti-foaming, air entraining, plastic retaining, strengthening, mould releasing and resistance reducing. The main admixture types can be summarized as follows:

High Range Water Reducers / Superplasticisers
Based on sulfonated naphthalene or melamine formaldehyde condensates, Polycarboxylate Ethers. These admixtures give a much higher performance than the normal plasticisers. They are used to give very high levels of workability or water reductions from 12 to over 30%. They are used extensively on larger projects where reinforcing steel requires high workability. Also used in precast and on site where the large water reduction provides very high early strength and improved durability

HRWR(high-range water-reducing)admixtures are organic products that typically fall into four families based on ingredients:
1. Polycarboxylate-based Superplasticizer(PC/PCE);
2. Sulfonated Naphthalene-formaldehyde Condensate(SNF/PNS)
3. Amino Sulfonic Acid-based Superplasticizer;(AS)
4. Sulfonated Melamine-formaldehyde Condensate;(SMF)
5. Acetone Sulfonate Formaldehyde Condensate(AK)

Water Reducer / Plasticizers

As an experienced ready mix concrete admixture manufacturer in China, our company also offers non-dispersible underwater concrete, high strength non-shrink grout, concrete surface treatment agent, concrete crack repair adhesive, among others.

Other Products
  • PCL Polycarboxylate Superplasticizer Concrete AdmixturePCL polycarboxylate superplasticizer concrete admixture features good stability especially at low temperature. Besides, the liquid concentration of our product can be diluted from 50% to 10% and then you can directly use the diluted product as pumping admixture of mixing plant.
  • FDN Naphthalene Sulfonate Formaldehyde Condensate Concrete AdmixtureCompared with UNF-5 type, FDN naphthalene sulfonate formaldehyde condensate concrete admixture has higher water reducing rate and fewer concrete slump loss, which can efficiently increase the concrete fluidity, reduce bleeding and segregation and then improve the workability of concrete.